Six effect systems. One factory. Zero middlemen.
Every unit below is engineered, calibrated and safety-tested in our Guangzhou facility — and quoted at the production-line price, with CE certificates and test reports attached before you pay.
The indoor spark wall venues actually approve.
Smokeless, flameless sparks from titanium composite granules — safe beside performers, night after night, with no pyro license required in most jurisdictions.
- Adjustable 1–5 m spark height via DMX512 or wireless remote
- Factory-calibrated so multi-unit spark walls fire symmetric
- Tilt sensor and thermal cutoff as standard, not options
- Low granule consumption — lowest cost per firing minute in its class
Towering plumes, exactly on the beat.
8–10 meter white CO&sub2; plumes with sub-second response — the punchiest visual per dollar on any club or festival stage.
- 8–10 m plume with instant start/stop response
- Wired DMX512 and wireless triggering built in
- Standard siphon LCO&sub2; tank fittings; heated-hose options
- Stage-mount, truss-mount and handheld gun variants
Real fire, under real control.
Programmable 1–6 m flame columns with the multi-stage interlocks your safety officer will ask about first.
- DMX512 control with arming key, safety channel and e-stop
- Ignition monitoring — fuel cuts instantly if flame is lost
- Single-head and 5-head angled (chase / fan) models
- Road-case-ready steel housing
Dry-ice looks. No dry-ice logistics.
Dense, floor-hugging fog from water-based fluid — no sourcing, storing or handling frozen CO&sub2; before every show.
- Dense ground-hugging fog with clean dissipation
- No dry ice — runs on AyroFog™ water-based fluid
- Quiet mode for theater and ceremony use
- DMX512, timer and wireless remote control
High-volume bubbles. Low-residue floors.
Continuous twin-fan bubble output engineered for daily-show duty cycles — with a solution that keeps stages safe underfoot.
- Twin-fan, double-wheel high-volume output
- Duty-cycle rated for daily park operation
- Low-residue solution keeps floors safe
- DMX512 and standalone timer modes
Finales that land on the downbeat.
Continuous-feed confetti and streamer output with sub-second triggering — sustained storms, not single pops.
- Continuous feed — sustained storms, not single pops
- 15–25 m throw with predictable coverage
- Paper, metallic and biodegradable confetti compatible
- Top-loading hopper for fast mid-show reloads
Why producers are replacing pyro with cold spark.
If you’re still specifying traditional pyrotechnics for indoor moments, here’s the comparison your venue and insurer wish you’d seen sooner.
|
Consideration
|
Ayrofx CS-01 Cold Spark
|
Traditional Pyrotechnics
|
|---|---|---|
|
Operator license
|
Not required in most jurisdictions
|
Licensed pyrotechnician typically required
|
|
Heat & fire risk
|
Sparks safe to the touch; no open flame
|
Hot ejecta; strict clearance distances
|
|
Venue approval
|
Routinely approved with certification documents
|
Often refused indoors or heavily conditioned
|
|
Smoke & residue
|
Minimal smoke, no fallout debris
|
Smoke, odor and debris cleanup
|
|
Repeatability
|
Reusable — refill granules and fire again
|
Single-use consumables per effect
|
|
Cost per show
|
Low — granules only, machine amortized
|
High — consumables, licensed crew, permits
|
Your brand. Our factory. One supply chain.
Rental houses, distributors and AV brands use Ayrofx as their manufacturing backbone. We build to your spec — housings, logos, firmware, DMX profiles and packaging — with the same certification and 100% unit testing as our own lines.
- Custom branding and housing options with realistic MOQs
- Firmware and control customization for your ecosystem
- Certification support for your target markets
- Ongoing spare-parts supply and technical documentation
Not sure which system fits your venue?
Send venue size, ceiling height and show type — we’ll recommend the right configuration and quote it within 24 hours.